Sodankylä Geophysical Observatory

KAIRA MONITORING  :  Summary  |  Operators  |  BST  |  SST  |  XST  |  Computing  |  Archive


Computing

KAIRA operates using a distributed IT system. Computers may be added/removed as they are introduced into the network or are decommissiioned. A similar arrangement is made for storage. When units are running and online, their status is shown on this page.




KAIRA Computers

MachineCPUiurs MachineCPUiurs MachineCPUiurs MachineCPUiurs
kaira00
kaira08
kaira16
kaira24
kaira01
kaira09
kaira17
kaira25(reserved)
kaira02
kaira10
kaira18
kaira26
kaira03
kaira11
kaira19
kaira27(not allocated)
kaira04
kaira12
kaira20
kaira28(not allocated)
kaira05
kaira13
kaira21
kaira29(not allocated)
kaira06
kaira14
kaira22
kaira30(reserved)
kaira07
kaira15(reserved) kaira23
kaira31(not allocated)

Last updated (UTC):



KAIRA Storage

/data0 =
/kdata020 =
/kdata030 =
/kdata040 =
/data1 =
/kdata021 =
/kdata031 =
/kdata041 =
/data2 =
/kdata022 =
/kdata032 =
/kdata042 =
/data3 =
/kdata023 =
/kdata033 =
/kdata043 =
/data4 =
/kdata024 =
/kdata034 =
/kdata044 =
/data5 =
/kdata025 =
/kdata035 =
/kdata045 =(not allocated)
/data6 =
/kdata026 =
/kdata036 =
/kdata046 =(not allocated)
/kdata027 =
/kdata037 =
/kdata047 =(not allocated)
/kdata028 =
/kdata038 =
/kdata048 =(not allocated)
/kdata029 =
/kdata039 =
/kdata049 =(not allocated)

Last updated (UTC):



Entries in the above table that are blank are units that are (or have been) in service but are currently offline or otherwise unavailable. Additional labels are included, but are marked "reserved" or "not allocated", to indicate their status. /kdata000 to /kdata019 are existing disks that have been archived. Typically, they contain development backups or operational data from the early days of KAIRA operation (2010-2013). /kdata050 to /kdata059 are reserved numbers for future development. Numbers /kdata060 and over are unallocated.




Ref.Doc: KAIRA-NORCE-IDX-610

Some computing data is directly relevant to the KAIRA site and the specfically the electronics and signal processing required to keep the station operational. These units ingest raw data from the phased arrays and the following parameters pertain to them and the environment required to support them.

Details specific to the RF-cointainer at the KAIRA site itself.

Secondary data storage:
/data0 =
/data1 =
/data2 =

Primary data storage:
/kdata020 =
/kdata021 =
/kdata022 =
/kdata023 =
/kdata024 =
                                   
RCU observing mode =

RF-container temperature (°C) =
RF-container humidity (%) =
Heater state =
LCU power =
48V power =

Last updated (UTC):
Date =
Time =

This page automatically refreshes approximately every 5 minutes.



See also:

Last modified: 06 September 2023, 11:53:46.

Data privacy notice